The Phoenix® Multi-Fit is a highly efficient gas fired commercial water heater. It is manufactured with super durable stainless steel materials to last longer and provide optimum heat transfer. The Multi-Fit will accommodate even the most difficult installations with lower clearance and multiple inlet and outlet connections, making it easier to replace than traditional flue heaters.
HTP Gas Fired Water Heater, Multi-Fit, Series: Phoenix®, 199000 Btu/hr Heating, Natural/Liquid Propane, 3/4 in Gas Connection, 100 gal Tank, Spark Ignition, 3 in Vent Size, 329 gph, Up to 90 % Energy Efficient, 1-1/2 in NPT Water Connection, 160 deg F, Ultra Low NOx: Yes, ASME Yes/No: No, 316L Stainless Steel, 27 in Dia x 63 in H
Type
|
:
|
Multi-Fit
|
Series
|
:
|
Phoenix®
|
Heating Capacity
|
:
|
199000 Btu/hr
|
Fuel Type
|
:
|
Natural/Liquid Propane
|
Gas Connection
|
:
|
3/4 in
|
Tank Capacity
|
:
|
100 gal
|
Ignition Type
|
:
|
Spark
|
Vent Size
|
:
|
3 in
|
Flow Rate
|
:
|
329 gph
|
Energy Efficiency
|
:
|
Up to 90 %
|
Water Connection
|
:
|
1-1/2 in NPT
|
Temperature Rating
|
:
|
160 deg F
|
Ultra Low NOx
|
:
|
Yes
|
Material
|
:
|
316L Stainless Steel
|
Dimensions
|
:
|
27 in Dia x 63 in H
|
- High efficiency heat exchanger - copper nickel primary with 800 H and copper nickel secondary tube construction
- Gasketless heat exchanger design
- Combustion system - modulating burner with up to 5 to 1 turndown
- High grade inconel premix burner
- Dual flame monitoring
- Flame stabilization monitoring - automatic adjustment of firing rate to stabilize flame signal
- Integrated control system - digital operating control with LCD display three character for temperature and system monitor - LCD indicators for appliance faults (red light) and operation (green light)
- System parameters password protected
- 120 V 5 A electrical connection for condensate pump
- 0 to 10 VDC input for building management system
- Dry contact for alarm output
- Outdoor sensor input
- Computer monitor cable allows user to monitor system parameters - fault history - graphical monitor of system operation
- Stainless steel tank - system return tube with screen for built-in dirt and air separation
- Built-in low water cutoff probe
- Sanitizer models - set to 184 deg F operating temperature with an adjustable 2 deg F differential for sanitation purposes
- Vents in PVC - CPVC - stainless steel - ULC S636 flexible polypropylene vent liner (chimney lining only)
- Vents up to 200 combined equivalent feet in 3 in venting (up to 85 combined equivalent feet in 2 in venting)
- Manual reset high limit
-
Catalog
https://www.texasplumbingsupplyinc.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/HTP_PHM130100_Catalog.pdf
-
Instruction/Installation Manual
https://www.texasplumbingsupplyinc.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/HTP_PH100119_Manual.pdf
-
Line Drawing
https://www.texasplumbingsupplyinc.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/HTP_PHM130100_Line_Drawing.pdf
-
Specification Sheet
https://www.texasplumbingsupplyinc.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/HTP_PH100119_Specification_Sheet.pdf
-
Warranty Information
https://www.texasplumbingsupplyinc.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/HTP_PHM130100_Warranty.pdf