Lasco® Tee, Tee Fitting/Connector, 2-1/2 in Nominal, Slip End Style, 7 in Length, SCH 40/STD Schedule, 125 lb Pressure Class, Injection-Molded Method of Manufacture, PVC, Buna-N O-Ring Seal, White, 140 deg F, Domestic
Fitting/Connector Type
|
:
|
Tee
|
Nominal Size
|
:
|
2-1/2 in
|
End Style
|
:
|
Slip
|
Length
|
:
|
7 in
|
Schedule Rating
|
:
|
SCH 40/STD
|
Pressure Class
|
:
|
125 lb
|
Method of Manufacture
|
:
|
Injection-Molded
|
Material
|
:
|
PVC
|
Color
|
:
|
White
|
Temperature Rating
|
:
|
140 deg F
|
Domestic/Import
|
:
|
Domestic
|
- ASTM D-1784: Rigid poly vinyl chloride (PVC) compounds and chlorinated poly vinyl chloride (CPVC) compounds
- ASTM F-1970: Standard specification for special engineered fittings, appurtenances or valves for use in poly vinyl chloride (PVC) or chlorinated poly vinyl chloride (CPVC) systems
- Lasco® SCH 40 fittings are produced from PVC type 1, cell classification 12454-B
- NSF/ANSI standard 61, Annex G: Drinking water system components Weighted average lead content of less than or equal to 0.25% and is in compliance with California's Health and safety code Section 116875 (commonly known as AB 1953)
- Not to be used in the hot or cold water distribution system in a dwelling maximum service temperature 140 deg F
- Do not use Lasco® fittings for compressed air or gases
- Do not test PVC piping systems with compressed air or gases
- Do not use fittings with liquids not recommended by Lasco®
- Fitting modification voids the warranty
-
Specification Sheet
https://www.texasplumbingsupplyinc.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/LASCO_401-005_Specification_Sheet.pdf