ASME and Non-ASME Electronic Ignition models, featuring the ICON HD™ Commercial Control System, provide solutions to applications with various demands for hot water. With capacities ranging from 38 to 100 gal and with inputs from 125000 to 505000 Btu/hr. There's a model that will meet various requirements. Power Vent kits are available for all models.
Bradford White® Gas Water Heater, Flue Damper, 199999 Btu/hr Heating, Natural Gas, 1 in Gas Connection, 100 gal Tank, Electronic Ignition, Atmospheric Vent, 6 in Vent Size, 485 gph at 40 deg F Rise Recovery, 80 % Energy Efficient, 1-1/2 in NPT Water Connection, 150 psi, 180 deg F, Ultra Low NOx: No, ASME Yes/No: No, Steel, Vitraglas®, 30-1/4 in Dia x 34-1/2 in D x 74-11/16 in H, Domestic
| Type | : | Flue Damper |
| Heating Capacity | : | 199999 Btu/hr |
| Fuel Type | : | Natural Gas |
| Gas Connection | : | 1 in |
| Tank Capacity | : | 100 gal |
| Ignition Type | : | Electronic |
| Vent Type | : | Atmospheric |
| Vent Size | : | 6 in |
| Recovery Rate | : | 485 gph at 40 deg F Rise |
| Energy Efficiency | : | 80 % |
| Water Connection | : | 1-1/2 in NPT |
| Pressure Rating | : | 150 psi |
| Temperature Rating | : | 180 deg F |
| Ultra Low NOx | : | No |
| Material | : | Steel |
| Finish | : | Vitraglas® |
| Dimensions | : | 30-1/4 in Dia x 34-1/2 in D x 74-11/16 in H |
| Domestic/Import | : | Domestic |
- ICON HD™ - Intelligent proven design combines temperature control, diagnostic codes and system ignition functions into a single control board with a digital LCD display
- Operation mode - Two different digitally displayed operation modes have the capability of adjusting the temperature setting up to 180 deg F, and adjusting the degree setting
- Service mode - Eight different digitally displayed service modes can be easily cycled through by pressing the select button
- Electronic ignition - High voltage, low current electricity is sent to the pilot electrode initiating a spark to ignite the pilot gas
- Automatic flue damper
- Factory installed Hydrojet® sediment reduction system - Cold water inlet sediment reducing device helps prevent sediment build up in the tank
- Vitraglas® lining
- Insulation system - Non-CFC foam covers the sides and top of the tank, reducing heat loss
- Water connections - 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections
- Hand hole cleanout
- E.C.O - An automatic re-set energy cut off (E.C.O.) shuts off all gas in event of an overheat condition
- Protective magnesium rod - Provides added protection against corrosion for long trouble-free service
- Durable tamper proof design low restriction brass drain valve
- 4.5 in WC
-
Brochure
-
Catalog
-
Catalog
-
Catalog-1
-
Data/Spec Sheet-1
-
Instruction/Installation Manual
-
Instruction/Installation Manual
-
Instruction/Installation Manual
-
Instruction/Installation Sheet
-
Service Manual
-
Service Manual
-
Specification Sheet
-
Specification Sheet
-
Specification Sheet
-
Warranty Information
-
Warranty Information
-
Warranty Information
-
Warranty Information
-
Warranty