Sioux Chief Carrier Bracket, Series: 521-72, 0.731 in Thickness, Steel, Copper Plated, 23-1/2 in H, Domestic
| Series | : | 521-72 |
| Thickness | : | 0.731 in |
| Material | : | Steel |
| Finish | : | Copper Plated |
| Dimensions | : | 23-1/2 in H |
| Domestic/Import | : | Domestic |
- Channel design extend the entire L of the bracket for maximum strength and rigidity
- Position bracket upright and flush with the carrier plate using stub bolt packaged with, and located on the carrier
- Tighten nut to secure bracket in place
- Install 1 in copper pipe in the receiving hole at the top of the bracket and solder pipe to bracket
- Apply heat to tube, not bracket
- Flush Valve Stubout bracket for wall-hung water closets
Specification Sheet
Sioux Chief Commercial Carrier brackets shall be used where necessary to support flush valves on carriers for wall-hung water closets. Carrier bracket shall be copperplated with two elongated slots located at the bottom of the bracket for mounting upright on either side of the carrier's stud bolts. Bracket shall include a single opening at the top for soldering a 1 in copper stub out flush valve supply. Brackets offer either 4-1/2 in or 4-3/4 in side rough measurement from carrier's center depending on bracket model number and position flush valve at 11-1/2 in above the toilet fixture.