The Taco® Hot-Link® System (HLS-1) for domestic hot water recirculation reduces the time it takes for hot water comfort to reach showers and faucets. The Hot-Link® System can save an average family up to 12,000 gal of water per year and it's easy to retrofit to an existing plumbing system.
Taco® Hot-Link® Hot Water Recirculation System, Series: HLS, 1/2 in MNPT Inlet, 1/40 hp, 115 VAC, 0.52 A, 60 Hz, 1 ph, 3250 rpm Motor, 4 in L x 1-3/4 in W x 4-7/16 in H
Series
|
:
|
HLS
|
Inlet Size
|
:
|
1/2 in MNPT
|
Power Rating
|
:
|
1/40 hp
|
Voltage Rating
|
:
|
115 VAC
|
Amperage Rating
|
:
|
0.52 A
|
Frequency Rating
|
:
|
60 Hz
|
Motor Speed
|
:
|
3250 rpm
|
Dimensions
|
:
|
4 in L x 1-3/4 in W x 4-7/16 in H
|
- Exclusive clean in place undersink valve design extends valve life reduces customer calls to replace "plugged" valves
- Creates a domestic hot water recirculation system without dedicated return loop piping
- Easy to retrofit to existing plumbing system
- Conserves water by greatly reducing the time it takes to get hot water
- Analog pump timer allows you to set the system to work during peak hours or to work continuously
- Stainless steel casting (volute) stator housing steel
- Stainless steel cartridge
- Noryl impeller
- Ceramic shaft, carbon bearings, EPDM O-ring
- Nylon body
- Bi-Metal thermal disk actuator
- EPDM O-ring seals
- Integral flow check (IFC®) - acetal body, plunger , EPDM O-rings, 304 SS screen, nylon stem, stainless steel actuator cartridge/braided flex hoses
- Permanent split capacitor impedance protected motor type
-
Data/Spec Sheet-1
https://www.texasplumbingsupplyinc.com//ASSETS/DOCUMENTS/ITEMS/EN/Taco_HLS1_Datasheet.pdf
-
Specification Sheet
https://www.texasplumbingsupplyinc.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/Taco_HLS1_Specification_Sheet.pdf
-
Specification Sheet
https://www.texasplumbingsupplyinc.com//ASSETS/DOCUMENTS/ITEMS/EN/https://cdn-assets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Taco_HLS1_Specification_Sheet.pdf