The TacoGenie™ provides hot water at your command at the same time it saves water, energy and money. The TacoGenie™ is a small, silent pump that you attach to the hot and cold water lines in the cabinet under the most remote kitchen or bath fixture in the home. When the TacoGenie™ pump is activated, the cool water you normally let run down the drain is recirculated back to the water heater through the cold water line.
Taco® TacoGenie™ Cartridge Circulator Pump, Series: 8 Series, 2.2 gpm, 1/2 in MNPT Inlet, 6.2 ft Maximum Head, 1/25 hp, 115 VAC, 60 Hz, 1 ph, 125 psi Maximum, 3250 rpm Motor, 40 to 220 deg F
| Series | : | 8 Series |
| Flow Rate | : | 2.2 gpm |
| Inlet Size | : | 1/2 in MNPT |
| Maximum Head | : | 6.2 ft |
| Power Rating | : | 1/25 hp |
| Voltage Rating | : | 115 VAC |
| Frequency Rating | : | 60 Hz |
| Maximum Pressure | : | 125 psi |
| Motor Speed | : | 3250 rpm |
| Temperature Rating | : | 40 to 220 deg F |
- TacoGenie, the pump circulates the hot water from the water heater and returns the cooled water back through the cold water line
- When the hot water arrives at the fixture, the TacoGenie's heat sensor and control board shut off the pump to prevent pumping excess hot water into the cold water line
- Note: Standard plumbing and distance requires the TacoGenie™ to be installed between the hot and cold water line at the most distant hot water location
- Stainless steel casing, steel stator housing
- 304 stainless steel cartridge
- Ceramic shaft
- EPDM O-ring
- Acetal body, plunger
- Noryl impeller, carbon bearings
- CT - TacoGenie™ threaded
- USK - undersink kit
Data/Spec Sheet-1
