Oatey® Lava™ CPVC Cut-In Cement, Heavy Duty Heavy Body Hot Low VOC, 8 oz Container, For Use With: Upto 6 in Dia CPVC Pipe and Fittings, Orange, Solvent Odor/Scent, Composition: Furan, Tetrahydro, Ethene, Chloro-, Homopolymer, Acetone, Silica, Amorphous, Fumed, 4 to 5 min Setting, 2 hr Curing, 40 to 110 deg F
| Container Size | : | 8 oz |
| Color | : | Orange |
| Type | : | Heavy Duty Heavy Body Hot Low VOC |
| Suitable For Use With | : | Upto 6 in Dia CPVC Pipe and Fittings |
| Odor/Scent | : | Solvent |
| Composition | : | Furan, Tetrahydro, Ethene, Chloro-, Homopolymer, Acetone, Silica, Amorphous, Fumed |
| Setting Time | : | 4 to 5 min |
| Curing Time | : | 2 hr |
| Temperature Rating | : | 40 to 110 deg F |
- Heavy bodied orange cement for use on all schedules and classes CPVC pipe and fittings up to 6 in diameter with interference fit
- One-step, fast curing cement designed for cut-in applications where limited time is available for down-time
- Low VOC solvent cement meets California South Coast air quality Management District (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements
- Approved for FlowGuard Gold® and Corzan® CPVC piping systems
- 400 psi (2 hr) hydrostatic burst strength
- Minimum 500 cps at 73 deg F +/- 2 deg F viscosity
- 8 +/- 0.2 lbs./gallon density
- 4 to 5 min (30 to 50 deg F)/2 to 3 min (50 to 70 deg F)/1 to 2 min (70 to 90 deg F) setting
- Fast set for pressure, potable water cut-in, repair applications
- Quickly melts pipe surface to weld the joint, primer not required
- Can be used on CPVC pipe and fittings up to 6 in. diameter with interference fit
- For commercial hot and cold water systems up to 200°F / 93°C, and including FlowGuard Gold® and Corzan® CPVC Piping Systems
- Designed for cut-in applications where available downtime is limited
- All Oatey solvent cement and primer products are certified to UL Greenguard Gold
https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Oatey_25215_Catalog.pdf
Oatey Orange Lava CPVC Cut-In Cement is a single-step, fast-curing cement is recommended for pressure, potable water cut-in, repair applications. Designed for cut-in applications where downtime is limited, it sets the fastest, eliminating the need for bracing. Because it quickly melts pipe surface to weld the joint, primer is not required. It also applies easily with included in-lid dauber. This orange, low VOC, medium bodied, fast setting cement can be used to solvent weld CPVC pipe and fittings up to 6 in. diameter with interference fit. Oatey products have earned the trust of plumbing professionals for over 100 years.