Zurn® ZURN PEX® QickSert CR™ Hose Tee, Fitting/Connector Type: Tee, 3/4 x 1/2 x 3/4 in Nominal Size, PEX Barb, 2.4 in Length, 80 to 160 psi, Molded, Polymer, 73 to 200 deg F, 1.2 in H

• Molded from highly engineered polymers
• ASTM F2159 specification for plastic insert fittings utilizing a copper crimp ring for SDR9 cross-linked polyethylene (PEX) tubing and SDR9 polyethylene of raised temperature (PE-RT) tubing
• ASTM F877 specification for crosslinked polyethylene (PEX) plastic hot and cold-water distribution systems

• Data/Spec Sheet https://www.texasplumbingsupplyinc.com//ASSETS/DOCUMENTS/ITEMS/EN/Zurn_QQPT333X_Data_Sheet.pdf
• Instruction/Installation Manual https://www.texasplumbingsupplyinc.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/Zurn_QQC33GX_Manual.pdf
• Instruction/Installation Sheet https://www.texasplumbingsupplyinc.com//ASSETS/DOCUMENTS/ITEMS/EN/Zurn_QQC33GX_Instruction_Installation.pdf
• Specification Sheet https://www.texasplumbingsupplyinc.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/Zurn_QQPT333X_Specification_Sheet.pdf
• Warranty Information https://www.texasplumbingsupplyinc.com//ASSETS/DOCUMENTS/ITEMS/EN/https://assets.unilogcorp.com/2/ITEM/DOC/Zurn_QAFA33FQP_Warranty.pdf
• Warranty https://www.texasplumbingsupplyinc.com//ASSETS/DOCUMENTS/ITEMS/EN/Zurn_QAFA33FQP_Warranty.pdf

ZurnPEX® QickSert CR™ Barb x Barb x Barb tee. The QQPT_X tee is used to branch off a main line or change direction. Molded from Acudel®. These fittings, as a system with Zurn PEX® tube, are pressure rated at 160 psi at 73 deg F, 100 psi at 180 deg F, and 80 psi at 200 deg F. These fittings are listed by NSF as complying with the following standards NSF/ANSI Standard 14, NSF/ ANSI Standard 61, ASTM F877, and CSA B137.5, and ASTM F2159.